Criteria of ductility in uniaxial tension / H.H. Bleakney, Physical Metallurgy Division. : M38-1/75-1961E-PDF

"In the 1946 Campbell Memorial Lecture, Gensamer pointed out that there are two quite separate and distinct aspects to ductility in metals. One is related to cohesive strength and the other to the distribution of deformation. In this paper the author proposes to discuss and identify these aspects, to suggest a criterion by which the separate contributions of each may be evaluated in a conventional tension test, and to report the results of an experiment which shows that the suggested criterion may be successfully employed in practice"--Introduction, page 1.

Lien permanent pour cette publication :

Renseignements sur la publication
Ministère/Organisme Canada. Department of Mines and Technical Surveys.
Canada. Mines Branch.
Canada. Physical Metallurgy Division.
Titre Criteria of ductility in uniaxial tension / H.H. Bleakney, Physical Metallurgy Division.
Titre de la série Research report ; R 75
Type de publication Série - Voir l'enregistrement principal
Langue [Anglais]
Format Électronique
Document électronique
Note(s) Cover title.
"January 16, 1961."
Imperfect copy: the back cover is wanting.
Digitized edition from print [produced by Natural Resources Canada].
Includes bibliographical references.
part I. An examination of steel currently in use -- part II. Modifications of this steel.
Includes abstract in French.
Information sur la publication Ottawa : Department of Mines and Technical Surveys, Mines Branch, 1961.
Auteur / Contributeur Bleakney, H. H.,author.
Description 1 online resource (iv, 32 pages) : illustrations.
Numéro de catalogue
  • M38-1/75-1961E-PDF
Numéro de catalogue du ministère 306836
Descripteurs Metals
Demander des formats alternatifs
Pour demander une publication dans un format alternatif, remplissez le formulaire électronique des publications du gouvernement du Canada. Utilisez le champ du formulaire «question ou commentaire» pour spécifier la publication demandée.
Date de modification :